The short answer: For new builds off Olivet Church Road, the winning order of operations is simple. Measure after trim and paint are done, not before. Order in phases, bedrooms and baths first, showpiece rooms second. And if there is any chance you will ever want motorized shades, have wire roughed in while the walls are still open. Those three decisions cost nothing extra and save the most regret.
Big glass is the signature of these new builds
The new construction going up in the Olivet Church Road area leans hard into glass. Great rooms with tall stacked windows, wide kitchen sliders, oversized primary bedroom windows facing whatever the lot offers. It looks fantastic on a walkthrough. Then you move in and discover that big glass is a heat machine in the afternoon and an aquarium at night. Every new-build client I meet in McCracken County has the same two problems on day one: no privacy and no light control. The third problem shows up on the first bright afternoon, when the west-facing rooms turn into greenhouses and the thermostat starts fighting the glass. The good news is that a new build is the easiest house in the world to do this right, if you sequence it properly.
When should you measure a new construction window?
After the window trim is installed and the painters are done, and not one day before. Drywall returns, casing choices, and even paint build change the final opening dimensions, and treatments built from framing-stage numbers come back wrong. I get called to fix that mistake more than I would like. I wrote the full timeline in when to measure for window treatments in new construction, but the rule fits in one sentence: measure the finished opening, because that is the opening the shade has to live in. I coordinate with builders on this all the time and a good builder will happily tell me the week trim wraps.
Phased ordering: which rooms come first
Very few people outfit a whole new house at once, and you do not need to. Here is the sequence I recommend. Phase one is sleep and privacy: bedrooms, bathrooms, and any glass facing a neighbor or the street. Phase two is comfort: the great room and kitchen glass that takes afternoon heat. Phase three is the finish work: specialty shapes, the office, secondary rooms. Phasing spreads the spending, and it also lets you live in the house before committing fabrics and colors to the rooms where looks matter most. What you learn in month one about how the sun moves through your house is worth more than any showroom guess. Phase one can be measured and ordered before you close, so the private rooms are covered the day you move in, and nobody is hanging bedsheets over the primary bedroom glass.
Builder-grade glass and the heat problem
New windows are better sealed than old ones, but most builder packages are not high-end glass, and a west-facing wall of it will cook a room by late afternoon. On big new-build glass I lean on solar fabrics from my roller shades line. The mesh cuts glare and heat gain while keeping the open view these houses are designed around, and clean roller hardware suits the modern trim. For bedrooms, the same hardware takes room-darkening fabric, so the whole house stays visually consistent from the street while each room gets the fabric its job requires. That consistency matters more in a new neighborhood than people expect, because every house is visible from every other one until the trees grow in.
The cheapest wire you will ever run
Here is the one thing I wish every Olivet Church Road builder client heard before drywall: rough in power for shades now. A short run to the top corner of the big windows during construction is trivial for your electrician. The same wire after drywall means patching and painting. Hardwired power means your motorized shades never need charging, which matters most on tall glass you cannot reach. Even if motors are a someday idea, the wire waits patiently in the wall. If someday never comes, you lost almost nothing. If it does, you skipped the drywall patching, the repainting, and the week of dust that comes with running wire through a finished wall.
How I handle new builds around Paducah
I am Preston, and I measure and install personally across Paducah, from the Olivet Church Road area to Lone Oak and Reidland and out to Calvert City. For new construction I like getting involved before closing: a quick walkthrough tells me your measure-ready date, which openings need special handling, and where wiring makes sense. Then measuring happens the week trim and paint finish, and installs are usually done before the moving truck arrives, so you never spend a night behind bare glass.
Where I would pump the brakes
A little honesty for balance. Do not order treatments for every window before you have lived in the house, because you will guess wrong somewhere, and the showpiece rooms deserve decisions made with your furniture actually in place. Skip motors on ordinary reachable bedroom windows, manual cordless works fine there and the difference is real money. And if your builder offers a generic blinds package at closing, compare it carefully. Sometimes it is fine for closets and laundry rooms, but it is rarely built to the finished openings with the care the main rooms deserve.
If you are building or just closed off Olivet Church Road, let me walk it with you. The consultation is free, at your house, with samples in hand and straight answers about what to do now versus later. Call or text (270) 545-4722 and we will get your sequence right from the start.