The short answer: For a new build along the Robertson Road corridor, measure for window treatments after trim and paint are done, plan any motorization wiring while the walls are still open, and cover the west-facing glass first because builder-grade windows let in more heat than you expect. Order in phases if the budget needs it, but pick the whole-house palette on day one.
Measure after trim, not after the slab
I am Preston Weatherly, and I measure and install every job we do in Murray myself, including a steady stream of new builds along the Robertson Road corridor. The most common mistake I see is measuring too early. Openings change as a house finishes. Drywall returns, trim depth, and even paint buildup all shift the final numbers, and a blind ordered off framing dimensions will fight the finished window forever. I explain the full sequence in our guide on when to measure for window treatments in new construction, but the short rule is this: when the painters leave, call me. That is the earliest moment a measurement is worth taking.
Builder-grade glass runs hot
New builds around Murray come with a lot of glass, and most of it is builder-grade. It meets code, but it does not do much to slow heat coming through, and a west-facing great room window will cook the sofa by late afternoon. This is not a reason to panic. It is a reason to spec the treatment to the exposure. The west and south glass gets the serious light and heat control. The north side can take whatever looks best. Walk your lot before we meet and notice where the sun lands in the late afternoon, because that wall is where your window treatment budget works hardest.
Why honeycomb shades fit new builds so well
If I could only use one product in a new build, it would be honeycomb shades. The cellular structure traps a layer of air at the glass, which takes the edge off both heat gain and cold drafts, so the same shade earns its keep in every kind of weather. They stack small, so the big windows these houses are built around stay open to the view when you want them open. They come in light-filtering and blackout versions, which handles bedrooms and living spaces from one product family, and the clean look suits a brand-new interior. On a top-down bottom-up lift, they also solve the privacy problem of a house that faces the road.
Wire for motorization before the drywall goes up
This is the one thing I wish every Robertson Road builder client heard earlier. If you think you might ever want motorized treatments, especially on tall or stacked windows, have power run to those window headers while the walls are open. Wiring at rough-in costs little and gives you clean, permanent power with no batteries to charge. Adding power after drywall means fishing wires or settling for rechargeable motors. Battery motors are good, and I install plenty, but a new build is the one chance to do it the clean way. Even if you skip motors now, the wire waits patiently in the wall.
Keep the whole house consistent
Drive the newer streets off Robertson Road in the evening and you can spot the houses that ordered window by window. One window glows bare, the next has white blinds, the next has something dark. From the street, your windows are one design, so pick one palette before anything is ordered: one treatment style and color for all street-facing windows, then vary function room by room behind that. Inside, repeating the same fabric tones through the open living space keeps a new floor plan feeling calm instead of patched together.
Phasing the order without wrecking the plan
A new build drains a budget, and window treatments land at the end of the line. Phasing works fine as long as the plan comes first. I spec the whole house in one visit, then we order in rounds: bedrooms and baths first for privacy, the hot west glass next, and the showpiece windows last. Because the palette was locked in the first visit, round three matches round one perfectly. Here is my honesty note: if the budget is truly stretched, I would rather you leave the guest room bare for a few months than fill the house with cheap stopgap blinds that you will pay to replace and haul to the curb within a year or two.
What should new build owners in Murray do first?
Before the walls close, decide about wiring. After paint, get the whole house measured in one visit, even if you order in phases. Cover privacy rooms and west glass first. And keep the street-facing look consistent from day one. That is the whole playbook, and it is a lot cheaper to follow than to retrofit. You can see the neighborhoods we cover, from downtown Murray to the Kentucky Lake side, on our Murray service area page.
If your build is coming out of the ground now, this is the perfect time to talk, even months before install. The in-home consultation is free, and I am happy to meet you at the job site. Call or text (270) 512-8288 and we will get your windows into the plan.